A high bill has three possible causes: the weather (more heating or cooling), the price (a higher rate or new fixed charges) and the home (a failing furnace, a new appliance, more people at home). Energy auditors separate them with degree days — and you can too.
Step 1: degree days for the same months
Heating degree days measure how cold a month was, cooling degree days how hot. Look up your state's months on our state pages (for example Pennsylvania or Texas): if this month had 15% more heating degree days than last year, expect roughly 15% more heating use.
Step 2: split baseload from heating and cooling
Your use in mild months is mostly baseload. Everything above it in winter is heating; in summer, cooling. Fitting usage = baseload × days + heating × HDD + cooling × CDD to a year of bills gives you all three numbers.
Step 3: normalize
Apply your fitted numbers to a normal year's degree days and you get weather-normalized usage — the fair way to compare this year with last, or before and after new insulation.
Let the analyzer do it
Our free bill analyzer runs the regression in your browser from 12 months of kWh, therms or gallons, shows how much the weather added or saved, how your home compares with a typical one, and what next month's bill should be.
Questions
How do I know if my bill is high because of the weather?
Compare your usage with heating (or cooling) degree days for the same months. If usage rose about as much as degree days did, it's the weather; if it rose more, something in the home or the rate changed.
What is baseload?
The energy you use regardless of weather — hot water, cooking, lights, appliances. It shows up as your summer gas use or spring/fall electricity use.
What is weather-normalized usage?
Your usage adjusted to a normal year's weather, so you can compare years fairly or check whether an upgrade worked.